Tadiran Telecom FlexSet 280 User Manual page 105

Group Calls: Submitting Request to Speak
Members may be permitted to participate in a Group Call with the ability to
speak and hear each other, or in the mute mode. In case of a muted conference
only a Group Call initiator has the right to speak. The user defined as Group
Operator can set his own station to the audible mode, while connected to the
conference, and to grant the right to speak to other participants.
This feature allows you to request permission to speak from the Group
Operator. The request is submitted while your current conference is in
progress, without disturbing it.
To send a request to speak to the Group Operator:
[REQUEST SPEAK]
1. Press
2. Continue attending the current conference, while watching the
[REQUEST SPEAK]
key LED and the second line of display.
3. TRX.ON message prompts that you are given permission to speak:
4. TRX.OFF message prompts that the permission to speak is taken away from
you.

Note: To program a Speech Request key
access code #1443, followed by the Group Operator dial number
(see page 85).
Group Calls: Submitting Request to Speak
[XFER]
or .
[REQUEST SPEAK]
#1443
Display Message
x = Group Operator dial number or name
A N S W E R xx xx
G R P C A L L ( g r o u p # )
A N S W E R xx xx
T R X . O N
A N S W E R xx xx
T R X . O F F
, use Help feature
80
Key LED
O N
O F F
O F F
FlexSet 120/280 User Guide