Tadiran Telecom FlexSet 280 User Manual page 220

Off-Hook
Line
Loop
Loop Originating
Only
On-Hook
Outside Line Access
Code
Port
PEX
Recall-Automatic
Glossary (cont.)
A p p e n d i x A - G l o s s a r y ( c o n t . )
Lifting the telephone handset from its cradle - has the same effect as pressing a preprogrammed
LOOP, LINE or SPKR key, but automatically inhibits the Speakerphone facility. Off-hook
provides the dial tone, which then enables you to dial or activate a feature.
The line key is used for making and receiving calls when the station is defined as a member of a
boss group. When several line keys are in use the station will act as if it is a multiline instrument.
The loop key is used for making and receiving calls. When several loop keys are in use the station
will act as if it is a multiline instrument.
This key is used only for making calls. When several loop keys are in use the station will act as if it
is a multiline instrument.
Replacing the telephone handset on its cradle - has the same effect as pressing the SPKR key.
A series of digits that must be dialed or keyed in order to gain access to a trunk or trunk group.
Provides access to a device, station or trunk from within the system.
Peripheral Expansion Module for FlexSet 280 series, enables the following:
Additional distance between FlexSet and the main cabinet, by providing an external power supply
input,
Connecting up to three FlexSet 40B units,
Additional listen only headset/handset/tape recorder connection.
The call that you have transferred to another extension that is busy or that does not answer, or that
you have put on 'hold', which has returned to you after a predetermined time-out period.
A-3 FlexSet 120/280 User Guide