Tadiran Telecom FlexSet 280 User Manual page 187

Silent Monitor, 1-Way Splitting
The 1-way (Split) Silent Monitor feature allows monitoring each party of the
2-way conversation separately. Only one of the conversing parties can be heard
at a time. The feature can be activated from idle only.
To activate a 1-way Silent Monitor:
1. Dial Split Silent Monitor feature code #1448 or press
2. Dial the port number of the original destination (1st party).
then
• To monitor the 1st conversing party, dial cancellation code ,
or
• To monitor the 2nd conversing party, dial activation code
While monitoring:
1. Monitoring volume can be adjusted by pressing
2. To cancel Split Silent Monitor, press
3. To whisper to the 1st party, press any

Notes: 1) Whispering to the 2nd conversing party is not allowed.
2) When you hear the reorder tone, it means that the port is protected
against monitoring (secured). The following message will be
displayed:
Silent Monitor, 1-Way Splitting
[SPLIT MONITOR]
.
[SPKR]
or hang up.
[WHISPER]
key (see also page
162
#1448
Display Message
port # = Original destination (1st part) port
.
S P L I T S I L E N T M O N
S P L I T M O N ( p o r t # )
S P L I T M O N ( p o r t # )
O R I G I N A L D E S T
.
S P L I T M O N ( p o r t # )
P A R T N E R D E S T
188).
W H S P R P A G E ( P O R T # )
S E C U R E D ( po r t # )
Key LED
number or name
FlexSet 120/280 User Guide