Resetting And Disabling Router Settings - Intel 480T User Manual

C H A P T E R 1 0
Table 49: Router Reset and Disable Commands
Command
clear iparp {<ipaddress> | vlan <name>}
clear ipfdb {<ipaddress> <netmask> | vlan
<name>]
disable bootp vlan [<name> | all]
disable bootprelay
disable icmp address-mask {vlan <name>}
disable icmp parameter-problem {vlan
<name>}
disable icmp port-unreachables {vlan
<name>}
disable icmp redirects {vlan <name>}
disable icmp time-exceeded {vlan
<name>}
194
IP Unicast Routing
Resetting and Disabling Router
Settings
To return router settings to their defaults and disable routing
functions, use the commands listed in Table 49.
Description
Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
Removes the dynamic entries in the IP
forwarding database. If no options are specified,
all IP FDB entries are removed.
Disables the generation and processing of
BOOTP packets.
Disables the forwarding of BOOTP requests.
Disables the generation of an ICMP address-
mask reply messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Disables the generation of ICMP parameter-
problem messages. If a VLAN is not specified,
the command applies to all IP interfaces.
Disables the generation of ICMP port
unreachable messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Disables the generation of ICMP redirect
messages. If a VLAN is not specified, the
command applies to all IP interfaces.
Disables the generation of ICMP time exceeded
messages. If a VLAN is not specified, the
command applies to all IP interfaces.