Intel 480T User Manual page 44

C H A P T E R 3
Table 8: Common Commands (continued)
Command
create vlan <name>
delete account <username>
delete vlan <name>
disable bootp vlan [<name> | all]
disable cli-config-logging
disable clipaging
disable idletimeout
disable port <portlist>
disable telnet
disable web
enable bootp vlan [<name> | all]
enable cli-config-logging
enable clipaging
42
Accessing the Switch
Description
Creates a VLAN.
Deletes a user account.
Deletes a VLAN.
Disables BOOTP for one or more
VLANs.
Disables logging of CLI commands to
the Syslog.
Disables pausing of the screen display
when a show command output reaches
the end of the page.
Disables the timer that disconnects all
sessions. Once disabled, console sessions
remain open until the switch is rebooted
or you logoff. Telnet sessions remain
open until you close the Telnet client.
Disables a port on the switch.
Disables Telnet access to the switch.
Disables Web access to the switch.
Enables BOOTP for one or more
VLANs.
Enables the logging of CLI configuration
commands to the Syslog for auditing
purposes. The default setting is enabled.
Enables pausing of the screen display
when command output reaches the
show
end of the page. The default setting is
enabled.