Intel 480T User Manual page 273

C H A P T E R 1 4
Table 69: Routing Access Policy Configuration Commands (continued)
Command
config ospf asbr-filter [<access_profile> |
none]
config ospf direct-filter [<access_profile> |
none]
config pim vlan [<name> | all] trusted-
gateway [<access-profile> | none]
config rip vlan [<name> | all ] export-filter
[<access-profile> | none]
config rip vlan [<name> | all] import-filter
[<access_profile> | none]
config rip vlan [<name> | all] trusted-
gateway [<access_profile> | none]
create access-profile <access_profile> type
ipaddress
delete access-profile <access_profile>
show access-profile <access_profile>
Access Policies
Description
Configures the router to use the access policy to
limit the routes that are advertised into OSPF for
the switch as a whole for switches configured to
support RIP and static route re-distribution into
OSPF.
Configures the router to use the access policy to
limit the routes that are advertised into OSPF for
the switch as a whole for switches configured to
support direct route re-distribution into OSPF.
Configures PIM-DM to use the access profile to
determine which PIM-DM neighbor is to receive
or reject the routes.
Configures RIP to suppress certain routes when
performing route advertisements.
Configures RIP to ignore certain routes received
from its neighbor.
Configures RIP to use the access list to
determine which RIP neighbor to receive (or
reject) the routes.
Creates an access profile. Once the access
profile is created, one or more addresses can be
added to it, and the profile can be used to
control a specific routing protocol.
Deletes an access profile.
Displays access-profile related information for
the switch.
271