Intel 480T User Manual page 80

C H A P T E R 4
Table 19: Port Commands (continued)
Command
disable learning ports <portlist>
disable ports <portlist>
disable sharing <port>
enable jumbo-frame ports [<portlist> | all]
enable learning ports <portlist>
enable ports <portlist>
enable sharing <port> grouping <portlist>
{port-based | address-based | round-robin}
78
Configuring Switch Ports
Description
Disables MAC address learning on one or more
ports for security purposes. If MAC address
learning is disabled, only broadcast traffic, EDP
traffic, and packets destined to a permanent
MAC address matching that port number, are
forwarded to the port. The default setting is
enabled.
Disables a port. Even when disabled, the link is
available for diagnostic purposes.
Disables a load-sharing group of ports.
Enables reception and transmission of jumbo
frames. A jumbo frame is dropped if it is
received on a port with jumbo frames disabled,
or if the jumbo frame needs to be forwarded out
of a port that has jumbo frames disabled.
Enables MAC address learning on one or more
ports. The default setting is enabled.
Enables a port.
Defines a load-sharing group of ports. The ports
specified in <
master port. Optional load-sharing algorithms
include:
•
•
•
If not specified, port-based load-sharing is used.
> are grouped to the
portlist
— Uses the ingress port as
port-based
criteria for egress port selection.
— Uses addressing
address-based
information as criteria for egress port
selection.
— Forwards packets to all
round-robin
egress ports in a round-robin fashion.