Intel 480T User Manual page 160

C H A P T E R 9
Table 41: ESRP Commands (continued)
Command
config vlan <name> esrp election-algorithm
[ports_track_priority_mac |
track_ports_priority_mac |
priority_ports_track_mac |
priority_track_ports_mac | priority_mac_only]
config vlan <name> esrp priority <value>
config vlan <name> esrp timer <hello_timer>
disable esrp vlan <name>
158
Enterprise Standby Router Protocol
Description
Configures the election algorithm on the
switch. The algorithm must be the same
on all switches for a particular VLAN.
Specify one of the following:
•
ports_track_priority_mac
Active ports, tracking information,
ESRP priority, MAC address
•
track_ports_priority_mac
Tracking information, active ports,
ESRP priority, MAC address
•
priority_ports_track_mac
ESRP priority, active ports, tracking
information, MAC address
•
priority_track_ports_mac
ESRP priority, tracking information,
active ports, MAC address
• — ESRP priority,
priority_mac
MAC address
The default setting is
ports_track_priority_mac
tracking information is configured for a
particular field, the field is ignored.
Configures the ESRP priority. The range
is 0 to 255. The higher number has higher
priority. The default setting is 0. A setting
of 255 configures the switch to be in
standby state.
Configures the time between ESRP
updates. The range is 1 to 255 seconds.
The default setting is 2 seconds. The
timer setting must be configured
identically for the VLAN across all
participating switches.
Disables ESRP on a VLAN.
—
—
—
—
. If no