Intel 480T User Manual page 233

C H A P T E R 1 2
Table 57: IP Multicast Routing Configuration Commands (continued)
Command
config dvmrp delete vlan [<name> | all]
config dvmrp vlan <name> timer
<probe_interval>
<neighbor_timeout_interval>
config dvmrp timer
<route_report_interval>
<route_replacement_time>
IP Multicast Routing
Description
Disables DVMRP on one or all IP interfaces.
If no VLAN is specified, DVMRP is disabled
on all IP interfaces.
Configures DVMRP interface timers. Specify
the following:
•
probe_interval
that the system waits between
transmitting DVMRP probe messages.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 10
seconds.
•
neighbor_timeout_interval
amount of time before a DVMRP
neighbor route is declared to be down.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 35
seconds.
Configures the global DVMRP timers.
Specify the following:
•
route_report_interval
amount of time the system waits between
transmitting periodic route report
packets. The range is 1 to 2,147,483,647
seconds (68 years). The default setting is
60 seconds. Because triggered update is
always enabled, the route report will
always be transmitted prior to the
expiration of the route report interval.
•
route_replacement_time
down time before a new route is learned,
once the previous route has been deleted.
The range is 1 to 2,147,483,647 seconds
(68 years). The default setting is 140
seconds.
— The amount of time
— The
— The
— The hold-
231