Free-Standing - Intel 480T User Manual

C H A P T E R 2 Installation and Setup
Figure 3: Fitting the mounting bracket
5 Repeat the three previous steps for the other side of the switch.
6 Insert the switch into the 19-inch rack. Ensure that ventilation
holes are not obstructed.
7 Secure the switch with suitable rack mount screws (not
provided).
8 Connect the switch to the redundant power supply (if
applicable).
9 Connect cables.

Free-Standing

The switch is supplied with four self-adhesive rubber pads. Apply
the pads to the underside of the device by sticking a pad in the
marked area at each corner of the switch.
Apply the pads to the underside of the device, one at each corner of
the switch. Place the devices on top of one another, ensuring that the
corners align. Up to four switches can be placed on top of one
another.
480t_028
31