Intel 480T User Manual page 45

C H A P T E R 3
Table 8: Common Commands (continued)
Command
enable idletimeout
enable license full_L3 <license_key>
enable telnet {access-profile [<access_profile> |
none]} {port <tcp_port_number>}
enable web {access-profile [<access_profile> |
none]} {port <tcp_port_number>}
history
show banner
Accessing the Switch
Description
Enables a timer that disconnects all
sessions (both Telnet and console) after
20 minutes of inactivity. The default
setting is disabled.
Enables a particular software feature
license. Specify <
license_key
integer.
The command
unconfig switch all
does not clear licensing information. This
license cannot be disabled once it is
enabled on the switch.
Enables Telnet access to the switch. By
default, Telnet is enabled with no access
profile, and uses TCP port number 23. To
cancel a previously configured access-
profile, use the
none
Enables Web access to the switch. By
default, Web access is enabled with no
access profile, using TCP port number
80. Use the option to cancel a
none
previously configured access-profile. You
must reboot the switch for this command
to take effect.
Displays the previous 49 commands
entered on the switch.
Displays the user-configured banner.
> as an
option.
43