Intel 480T User Manual page 213

C H A P T E R 1 1
Table 51: RIP Configuration Commands (continued)
Command
enable rip export [static | direct | ospf | ospf-
intra | ospf-inter | ospf-extern1 | ospf-extern2 |
static] metric <metric> {tag <number>}
enable rip originate-default {always} cost
<metric> {tag <number>}
enable rip poisonreverse
enable rip splithorizon
RIP and OSPF
Description
Enables RIP to redistribute routes from other
routing functions. Specify one of the
following:
•
•
•
•
•
•
•
The
uses the route metric obtained from the route
origin.
Configures a default route to be advertised by
RIP if no other default route is advertised. If
always
the default route to its neighbors. If
not specified, RIP adds a default route if there
is a reachable default route in the route table.
Enables the split horizon with poison-reverse
algorithm for RIP. The default setting is
enabled. If you enable poison reverse and
split horizon, poison reverse takes
precedence.
Enables the split horizon algorithm for RIP.
Default setting is enabled.
— Static routes
static
— Interface routes (only
direct
interfaces that have IP forwarding
enabled are exported)
— All OSPF routes
ospf
— OSPF intra-area routes
ospf-intra
— OSPF inter-area routes
ospf-inter
— OSPF external route
ospf-extern1
type 1
— OSPF external route
ospf-extern2
type 2
range is 0-15. If set to 0, RIP
metric
is specified, RIP always advertises
is
always
211