Intel 480T User Manual page 315

Netstructure 480t routing switch
Table of Contents

Advertisement

C H A P T E R 1 8
Table 77: Boot Option Commands
Command
config download server [primary | secondary]
<hostname | ipaddress> <filename>
download bootrom [<ipaddress> |
<hostname>] <filename>
download configuration <hostname |
ipaddress> <filename> {incremental}
download configuration cancel
download configuration every <hour>
download image [xmodem | [<ipaddress> |
<hostname>] <filename>] {primary |
secondary}
reboot {time <date> <time> | cancel}
Software Upgrade and Boot Options
Description
Configures the TFTP server(s) used by a
scheduled incremental configuration
download.
Downloads a BOOT ROM image from a
TFTP server. The downloaded image replaces
the BOOT ROM in the onboard FLASH
memory. If this command does not complete
successfully it could prevent the switch from
booting.
Downloads a complete configuration. Use the
incremental
incremental configuration download.
Cancels a previously scheduled configuration
download.
Schedules a configuration download. Specify
the hour using a 24-hour clock, where the
range is 0 to 23.
Downloads a new image by way of
XMODEM using the serial port, or from a
TFTP server over the network. If no
parameters are specified, the image is saved to
the current image. XMODEM is not
supported over a Telnet session.
Reboots the switch at the date and time
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the
keyword to specify an
option.
cancel
313

Advertisement

Table of Contents
loading

Table of Contents