Intel 480T User Manual page 187

C H A P T E R 1 0
Table 45: Basic IP Commands (continued)
Command
config bootprelay delete [<ipaddress> | all]
config iparp add <ipaddress> <mac_address>
config iparp add proxy <ipaddress> {<mask>}
{<mac_address>} {always}
config iparp delete <ipaddress>
config iparp delete proxy [<ipaddress> {<mask>}
| all]
config iparp timeout <minutes>
disable bootp vlan [<name> | all]
disable bootprelay
disable ipforwarding broadcast {vlan <name>}
disable ipforwarding {vlan <name>}
IP Unicast Routing
Description
Removes one or all IP destination
addresses for forwarding BOOTP
packets.
Adds a permanent entry to the ARP table.
Specify the IP address and MAC address
of the entry.
Configures proxy ARP entries. When
is not specified, an address with the
mask
mask 255.255.255.255 is assumed. When
is not specified, the MAC
mac_address
address of the switch is used in the ARP
Response. When
always
switch answers ARP Requests without
filtering requests that belong to the same
subnet of the receiving router interface.
Deletes an entry from the ARP table.
Specify the IP address of the entry.
Deletes one or all proxy ARP entries.
Configures the IP ARP timeout period.
The default setting is 20 minutes. A
setting of 0 disables ARP aging. The
maximum aging time is 32 minutes.
Disables the generation and processing of
BOOTP packets.
Disables the forwarding of BOOTP
requests.
Disables routing of broadcasts to other
networks.
Disables routing for one or all VLANs.
is specified, the
185