Intel 480T User Manual page 220

C H A P T E R 1 1
Table 54: OSPF Configuration Commands (continued)
Command
config ospf area <areaid> add range
<ipaddress> <mask> [advertise | noadvertise]
[type 3 | type 7]
config ospf area <areaid> delete range
<ipaddress> <mask>
config ospf area <areaid> normal
config ospf area <areaid> nssa [summary |
nosummary] stub-default-cost <cost>
{translate}
config ospf area <areaid> stub [summary |
nosummary] stub-default-cost <cost>
config ospf asbr-filter [<access_profile> |
none]
config ospf ase-summary add <ipaddress>
<mask> cost <cost> {<tag_number>}
config ospf ase-summary delete <ipaddress>
<mask>
config ospf delete virtual-link <routerid>
<areaid>
config ospf delete vlan [<name> | all]
config ospf direct-filter [<access_profile> |
none]
218
RIP and OSPF
Description
Configures a range of IP addresses in an
OSPF area. If advertised, the range is
exported as a single LSA by the ABR.
Deletes a range of IP addresses in an OSPF
area.
Configures an OSFP area as a normal area.
The default setting is
Configures an OSPF area as a NSSA.
Configures an OSPF area as a stub area.
Configures a route filter for non-OSPF routes
exported into OSPF. If
RIP and static routes are filtered.
Configures an aggregated OSPF external
route using the IP addresses specified.
Deletes an aggregated OSPF external route.
Removes a virtual link.
Disables OSPF on one or all VLANs (router
interfaces).
Configures a route filter for direct routes. If
none
exported if
normal
none
is specified, all direct routes are
ospf export direct
.
is specified, no
is enabled.