Intel 480T User Manual page 43

C H A P T E R 3
Table 8: Common Commands (continued)
Command
config banner
config ports <portlist> auto off {speed [100 |
1000]} duplex [half | full]
config time <date> <time>
config timezone <gmt_offset> {autodst |
noautodst}
config vlan <name> ipaddress <ip_address>
{<mask>}
create account [admin | user] <username>
{<password>}
Accessing the Switch
Description
Configures the banner string. You can
enter up to 24 rows of 79-column text
that is displayed before the login prompt
of each session. Press [Return] at the
beginning of a line to terminate the
command and apply the banner. To clear
the banner, press [Return] at the
beginning of the first line.
Manually configures the port speed and
duplex setting of one or more ports on a
switch.
Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format.
You cannot set the year past 2036.
Configures the time zone information to
the configured offset from GMT time.
The format of
gmt_offset
from GMT time. Specify:
— Enables automatic Daylight
autodst
Savings Time change.
— Disables automatic
nosautodst
Daylight Savings Time change.
The default setting is
Configures an IP address and subnet
mask for a VLAN.
Creates a user account. This command is
available to admin-level users and to
*
users with RADIUS
authorization. The username can be
between 1 and 32 characters, the
password is between 0 and 16 characters.
is +/- minutes
.
autodst
command
41