Intel 480T User Manual page 247

C H A P T E R 1 3
Table 63: Basic IPX Commands (continued)
Command
config ipxservice add <service_type>
<service_name> <netid> <mac_address>
<socket> <hops>
config ipxservice delete <service_type>
<service_name> <netid> <mac_address>
<socket>
config vlan <name> xnetid <netid> [enet_ii |
enet_8023 | enet_8022 | enet_snap]
enable type20 forwarding {vlan <name>}
*
IPX Routing
Description
Adds a static entry to the IPX service
table. Specify:
• — The service type.
service_type
• — The service name.
service_name
• — The IPX network identifier
netid
of the server.
• — The MAC address
mac_address
of the server.
• — The IPX port number on
socket
the server.
• — The number of hops (for
hops
SAP routing purposes).
Deletes an IPX service from the service
table.
Configures a VLAN to run IPX routing.
Specify:
• — Uses standard Ethernet
enet_ii
2 header.
• — Uses IEEE 802.3
enet_8023
length field, but does not include the
IEEE 802.2 LLC header.
• — Uses standard IEEE
enet_8022
format and uses IEEE 802.2 LLC
header.
• — Adds Subnetwork
enet_snap
Access Protocol (SNAP) header to
IEEE 802.2 LLC header.
Enables the forwarding of IPX type 20
(NetBIOS inside IPX) packets from one
or more ingress VLANs. The default
setting is disabled.
245