Advanced Record - Dedicated Micros SD Excel Installation Manual

Advanced Record

Menu View
Note: When Advanced Record settings have been changed, it is not possible access the Simple
Record menu until the newly configured Advanced Record settings have been applied. To do this,
open the Record menu and select the 'Save' option. It will then be possible to return to the Profile
Record menu and access Simple Record.
IMPORTANT:
not warrant turbo mode, a message will be displayed informing the user that
Days Recording
Channel
Copy To End
Copy To Next
Filter by
80
Switch to the Simple Profile Record menu.
If Turbo mode is 'Disabled' and record settings have been configured which
will exceed the unit's Codec performance threshold. A warning message will
be displayed informing the user that the 'Unit needs to be in turbo mode'. If the
unit is currently in turbo mode and the currently configured record settings do
'At the current settings the unit does not need to be in turbo mode'.
The codec's performance thresholds are detailed in the About-Codec Loading
menu (System Settings->Status->About->Codec Loading)
Displays the record duration possible using the current configuration.
Enables selection of a specific camera for editing.
Select to copy the current profile record settings to all
camera channels.
Select to copy the current profile record settings to the next
camera channel.
Connected cameras are available to be sorted by the resolution, select
the resolution of cameras to be displayed and configured.
SD Excel