Time And Date - Dedicated Micros SD Excel Installation Manual

Time and Date

This menu allows the time and date to be set on the unit. Required timezone information can also be
established and the unit time synchronised to that of the PC being used to view the webpages.
System Time
Current Time Zone
Time Format
Date Format
Set Time
Set Date
Set Time (Green)
Time Zone
SNTP Server
Note: It is recommended that an SNTP server is configured. Suitable networked SNTP servers can be
found here: http://support.ntp.org/bin/view/Servers/NTPPoolServers
The current system time and date is displayed.
Displays the currently selected time zone settings.
As default, the time displayed is in 12 hour format. This can be changed
to 24 hour if required.
As default, the date is entered dd/mm/yy. It can also be displayed as
mm/dd/yy or yy/mm/dd.
Enter a current time for the unit.
Enter a current date for the unit.
When current time/date as been entered, select this button to
implement changes.
Select the relevant timezone offset from the accompanying drop down
menu.
A Simple Network Time Protocol (SNTP) server allows external devices
to connect and set their current date and time settings to that of the
SNTP. If required, enter the SNTP server IP
address here.
37