Dedicated Micros SD Excel Installation Manual page 63

When granting access privileges to Local and Remote Users, it is possible to limit access to specific
cameras. Using the Camera Selection segment of the Add New Account menu, enter those cameras
for which access will be permitted. Select the cameras in accordance with the input channel they're
connected to on the rear of the unit. For example, if wanting to allow access to camera 1 to 3 inclusive,
enter: 1-3. If wanting to grant access to cameras 1,3 and 6, enter 1,3,6. If no camera data is entered,
access will be allowed to all connected cameras in both live and playback modes.
Note: There are no default usernames and passwords for any of the Account Types. If none are
assigned, access will be granted to all users and no request for a username and password will be
made.
Account List
Add
Modify/Delete
IMPORTANT: If passwords are implemented and then forgotten, it is likely the unit will need to be
returned to Dedicated Micros for unlocking.
Add (Red)
Modify (Green)
Delete (Yellow)
• Menu Configuration Assigning Menu Configuration access privileges
will limit access to the Configuration menus
when viewed locally. When implemented, the
user will be prompted for a username and
password before access to the Configuration
menus (via the main menu) will be granted.
• Local Users Assigning Local Users access privileges will
limit access to the Viewer pages for local users.
When implemented, the local user will be
prompted for a username and password before
access to the Viewer pages (via the main
menu) will be granted.
• Remote Users Assigning Remote Users access privileges will
limit access to the Viewer pages for remote
users. When implemented, the remote user
will be prompted for a username and password
before access to the Viewer pages (via the
main menu) will be granted.
When an Account Type is highlighted, details of users with access will
be displayed.
Highlight an administration feature i.e. Serial and select 'Add'. Enter the
new User Name and Password. That user's name will now be displayed
in the account list.
To modify or delete a user's settings, highlight the user in the list and
press the relevant button to Modify or Delete.
Highlight an administration feature i.e. Serial and select 'Add'. Enter the
new User Name and Password. That user's name will now be displayed
in the account list.
To modify user setting, highlight the user in the list and press to Modify.
To delete a user, highlight the user in the list and press to Delete.
63