Table of Contents
Advertisement
Live Transmissions
The unit transmits live images using JPEG or MPEG formats.
The NetVu Connected remote viewing software will use the settings configured on this page as the
defaults for JPEG & MPEG; High, Medium and Low settings.
Filter by
IMPORTANT:
There are three classifications of IP camera:
1. Standard Resolution - QCIF,CIF,2CIF,4CIF
2. Standard Resolution (VGA) - VGA,SVGA,QVGA,Q2VGA
3. Megapixel - VGA,SVGA,UXGA,QVGA,Q2VGA,XGA,XGA+,SXGA+,QXGA
The classification of each connected camera channel can be viewed via the CamConfig menu (System
Settings->Status->About->CamConfig).
High LAN/Medium WAN/Low VLBR
The resolutions available for selection will depend on the camera
types connected i.e. Standard Resolution or Megapixel Resolution and
whether Turbo Mode has been activated via the Profile Record menu
(Record Settings->Profile Record). Note that the Megapixel Resolution
option will only be available if a megapixel camera is connected.
This shows the transmission settings configured for a High quality
LAN (Local Area Network) connection, Medium quality WAN (Wide
Area Network) connection or a Low quality VLBR (Very Low Bit Rate
connection).
111
Advertisement
Table of Contents
Need help?
Do you have a question about the SD Excel and is the answer not in the manual?
Questions and answers