Table of Contents
Advertisement
Program Page
The Program Menu page allows the PTZ configuration on the currently selected telemetry camera to be
accessed and configured.
Red
Green
Note:
When entering a new preset, any previous preset assigned to that number (for the same camera)
will be overwritten.
Yellow
Blue
Note:
This option is only available for Oracle dome cameras.
Purple
168
Dome
Select to display the Dome Menu page.
Store
Use to save the current view as a Preset for this
camera. Press this button then a preset position (using
the numeric keys on the IR Remote Control or optional
Keyboard if viewing via a local monitor).
To re-send the camera to this position, select the
camera, then press Next -> Preset -> (preset number).
Select
This option will send the camera to
the stored 'Preset1' position.
Set Origin
The Origin option allows a base position to be
established for the Oracle dome camera. The camera
will register this position as zero degrees. Any
command that sends the camera to a coordinate will
use this origin as its starting point..
Back
Return to the 'PTZ Program Option' page.
SD Excel
Advertisement
Table of Contents
Need help?
Do you have a question about the SD Excel and is the answer not in the manual?
Questions and answers