Global Actions - Dedicated Micros SD Excel Installation Manual

Global Actions

This menu allows configuration of the default relay actions supported on the unit.
The unit supports four onboard relay connections and global relay settings. This global relay can be triggered
under specific conditions i.e. on receipt of any alarm or notification of Activity Detection.
Image Protection Period
Alarm Display Mode
Revert Display Mode
Alarm Display Alert
Normally
On
Contact
106
Select a time period (in days) that images associated with an alarm will
be protected from deletion.
When a relay has been triggered, the primary camera associated with
that relay can immediately be displayed on the local monitor. Select
'Jump To Primary Camera' from the drop down list to activate this
function.
Enable this setting to make the unit return to the view displayed before
the alarm activation once the alarm has ended.
Enable this setting to display an alarm text alert in the colour specified
in 'Alarm Colour' in the Zone Actions Menu.
Select whether the normal state of the relay contact should be Open or
Closed for each of the four local relays.
Select to enable detection of the accompanying condition. Options
available are; VMD/Activity, Camera Fail, System Set, Dial Out, System
Override, Camera Masked and Is Recording,
Specifies which Relay will be triggered when the associated alarm
is received
SD Excel