Table of Contents
Advertisement
Setup
This menu allows the configuration of active camera channels.
IMPORTANT:
The menu options displayed will differ depending on the camera 'Type' and 'IP
Mode' selected.
Note:
Ideally any setup options available locally on the camera should first be used to best obtain a
suitable image quality.
Mono/Colour Camera
Camera
Camera Nuisance Count
Title
Type
Select a camera channel for review and adjustment.
This is a repetitive detector value. When a camera failure alarm is
received on the unit, it will store the alarm time and monitor the number
of times the same alarm is triggered within an hour period. If the
detector is triggered the number of times entered here, the unit will set
the camera to 'No Connection'. To disable this feature, leave the setting
as '0'.
Assign a recognisable name to the camera. This will be displayed in
all references to the camera in the both the Configuration and Viewer
menus.
The settings will default to 'Colour'. If Monochrome cameras are used,
select 'Mono'. Selecting 'Mono' will remove colour patterning. Select'
'IP' for an IP Camera. If a particular channel is not in use or the camera
has failed, select 'No Conn'.
65
Advertisement
Table of Contents
Need help?
Do you have a question about the SD Excel and is the answer not in the manual?
Questions and answers