Technical Specifications - Custom Engineering PLUS II User Manual

3.1 TECHNICAL SPECIFICATIONS

Table 3.1 gives the main technical specifi cations for the printer.
Available interfaces
PLUS II-S, PLUS II-S-0004,
PLUS II-T
PLUS II-C, PLUS II-C-0004,
PLUS II-P
PLUS II-USB
Sensors
Printing driver
Receive buffer
Flash memory
Emulation
PAPER SPECIFICATIONS
Type of paper
Paper width
Recommended types of paper
Internal roll core diameter
External roll diameter
Core type
ENVIRONMENTAL CONDITIONS
Operating temperature
Relative humidity
Storage temperature /
Humidity
MECHANICAL SPECIFICATIONS
Dimensions
Weight [gr]
NOTE
(1)
RESERVED interface, only for service use.
(2) Only for PLUS II-USB.
(3) Referred without paper roll.
(Baud rate: from 600 to 38400 bps)
Serial RS232
(Baud rate: from 1200 to 115200 bps)
Head temperature, paper end
OPTIONAL: Cover open sensor
128 bytes
32 Kbytes
ESC/POS
Thermal rolls (heat-sensitive side on outside of roll)
LINERLESS paper (see paragraph 1.1.1)
Label paper roll (see paragraph 1.1.2)
-20 °C – 70 °C / 10% - 90% Rh
Length [mm] =
Width [mm] =
Height [mm] =
3. TECHNICAL SPECIFICATIONS
Serial RS232 / TTL
Parallel Centronics / TTL
(1)
TM
Windows 2K, XP
57 mm ±0.5 mm
from 55 g/m 2 to 70 g/m
13 mm
max. Ø50 mm
Cardboard or plastic
0-50°C
10-85% Rh
(3)
141
User Manual
(Tab.3.1)
USB
(2.0 Full speed)
(2)
2 Kbytes
(2)
512 Kbytes
(2)
PLUS II
2
85 max.
57 max.
85.5 max
PLUS II 3-1