Unpacking The Printer - Custom Engineering PLUS II User Manual

INTRODUCTION

UNPACKING THE PRINTER

Remove the printer from its carton being careful not to damage the packing material so that it may be re-used
if the printer is to be transported in the future. Make sure that all the components illustrated below are present
and that there are no signs of damage. If there are, contact Customer Service.
1. Fixing hooks
2. Box
3. Paper roll
(inside the printer)
4. Printer
1
1
2
• Open the printer packaging
• Take out the fi xing hooks and remove it from its plastic covering
• Take out the printer and remove it from its plastic covering
• Keep the box packing materials in the event the printer must be transported/shipped in the future
2 PLUS II
User Manual
4
3
(Fig.1)