Technical Specifications - Custom Engineering VKP80II User Manual

3.1 TECHNICAL SPECIFICATIONS

Table 3.1 gives the main technical specifi cations for the 204 dpi printer model.
Print method
Resolution
Paper specifi cations
Type of paper
Recommended types of paper
Width
Internal roll core diameter
External roll diameter
Core type
Sensors
Printing mode
Printing format
Character fonts
Available interfaces
Baud rate
Receive buffer
Flash memory
Graphics memory
Printing Driver
(5)
Dimensions
Weight (5)
Printing speed
High quality
Normal
High speed
NOTE:
(1)
(2)
(3)
(4)
(5)
Head temperature, black mark, paper presence, ticket presence on
output, opening of printing unit, (near paper end on roll support is
Height / Width from 1 to 8, bold, reverse, underlined, italic
For paper from 90 to 110 g/m
$1D $65 n [m]
For ticket width = 60 mm do not exceed a max length of 250 mm.
Referred to model without paper holder support.
It's better to use an external shock absorber for rolls with a diameter higher than or
equal to 100 mm.
Referred to model without paper holder support.
3. TECHNICAL SPECIFICATIONS
Thermal, fi xed head (8 dot/mm)
204 DPI (8 dot/mm)
Thermal rolls
Heat-sensitive side on outside of roll
from 55 g/m to 110
2
from 60
max Ø180 mm
OPTIONAL Upper attachment
OPTIONAL Rear attachment
OPTIONAL Lower attachment
Cardboard or plastic
optional)
Straight, 90°, 180°, 270°
PC437, PC850, PC860, PC863, PC865, PC858.
RS232
From 1200 to 115200 bps
16 Kbytes
384 Kbytes
2 logos of 608 x 862 dots (for 80/82,5mm paper width)
Windows 95, 98, ME, NT4, 2K, XP, Linux
TM
Length [mm] = 115
Height [mm] = 115
Width [mm] = 115
90 mm/sec
120 mm/sec
140 mm/sec
enable the dispenser continuous mode:
2
g/m (KANZAN)
(1) 2
to 82,5 mm
(2)
25mm
(3) (4)
max Ø170 mm
max Ø180 mm
max Ø180 mm
USB
2117 gr.
VKP80II 3-1
User Manual
(Tab.3.1)
(5)
(5)
(5)