Setting Serial Interface - Custom Engineering PLUS II User Manual

1. INSTALLATION AND USE

1.2.2 Setting serial interface

The JP4, JP5, JP6 and JP7 jumpers on controller board (see Fig.1.4) manages the setting of serial interface as
indicated:
Refer to Fig.1.4 for the jumpers position.
1-4 PLUS II
User Manual
SERIAL
RS232
TTL
JUMPERS
SELECTION
INTERFACE
JP4 JP5 JP6
JUMPERS
SELECTION
INTERFACE
JP7
(Fig.1.4)
RS232
TTL
RS232
TTL