Terminal/Connector Repair-Molex Connectors; Terminal/Connector Repair-Thomas And Betts Connectors; Molex Connector Repair; Using Special Tool 6742 - Jeep 200 Cherokee Service Manual

XJ
SERVICE PROCEDURES (Continued)
TERMINAL/CONNECTOR REPAIR-MOLEX
CONNECTORS
(1) Disconnect battery.
(2) Disconnect the connector from its mating half/
component.
(3) Insert the terminal releasing special tool 6742
into the terminal end of the connector (Fig. 8).
Fig. 8 Molex Connector Repair
1 – CONNECTOR
2 – SPECIAL TOOL 6742
(4) Using special tool 6742 release the locking fin-
gers on the terminal (Fig. 9).
(5) Pull on the wire to remove it from the connec-
tor.
(6) Repair or replace the connector or terminal, as
necessary.
Fig. 9 Using Special Tool 6742
1 – CONNECTOR
2 – SPECIAL TOOL 6742
8W - 01 GENERAL INFORMATION
TERMINAL/CONNECTOR REPAIR—THOMAS
AND BETTS CONNECTORS
(1) Disconnect battery.
(2) Disconnect the connector from its mating half/
component.
(3) Push in the two lock tabs on the side of the
connector (Fig. 10).
Fig. 10 Thomas and Betts Connector Lock Release
1 – LOCK TABS
(4) Insert the probe end of special tool 6934 into
the back of the connector cavity (Fig. 11).
(5) Grasp the wire and tool 6934 and slowly
remove the wire and terminal from the connector.
Fig. 11 Removing Wire Terminal
1 – SPECIAL TOOL 6934
8W - 01 - 11
Tabs