Table of Contents
Advertisement
8L - 10
LAMPS
Headlamp BULB . . . . . . . . . . . . . . . . . . . . . . . . 10
FOG LAMP BULB. . . . . . . . . . . . . . . . . . . . . . . . . 10
FRONT PARK/TURN SIGNAL LAMP BULB . . . . . . 11
SIDE MARKER LAMP BULB . . . . . . . . . . . . . . . . . 11
BACK-UP/BRAKE/REAR TURN SIGNAL/TAIL
LAMP BULB . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HEADLAMP BULB
REMOVAL
(1) Remove the screws attaching the bezel to the
grille opening panel (Fig. 1).
(2) Remove screws attaching the retaining ring to
the headlamp canister.
(3) Disconnect the headlamp bulb wire harness
connector.
(4) Separate the sealed beam from the vehicle.
Fig. 1 Headlamp Bezel
1 – HEADLAMP ADJUSTMENT
2 – NUT
3 – HEADLAMP
4 – BEZEL
5 – PARK/TURN LAMP
6 – SPRING
7 – BUMPER
INSTALLATION
(1) Connect wire harness connector.
(2) Position bulb in canister.
LAMP BULB SERVICE
TABLE OF CONTENTS
page
install screws.
FOG LAMP BULB
REMOVAL
to the bottom of the fog lamp (Fig. 2).
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers
or other oily surfaces. Reduced bulb life will result.
LICENSE PLATE LAMP BULB . . . . . . . . . . . . . . . 12
CENTER HIGH MOUNTED STOP LAMP
(CHMSL) BULB . . . . . . . . . . . . . . . . . . . . . . . . . 12
UNDERHOOD LAMP BULB . . . . . . . . . . . . . . . . . 12
CARGO LAMP BULB . . . . . . . . . . . . . . . . . . . . . . 13
MAP READING LAMP BULB. . . . . . . . . . . . . . . . . 13
VISOR VANITY LAMP BULB. . . . . . . . . . . . . . . . . 13
(3) Position retaining ring on sealed beam and
(4) Install headlamp bezel.
(1) Remove the screws attaching the access cover
(2) Remove spring clip securing bulb to fog lamp.
(3) Disconnect bulb wire connector.
(4) Remove bulb element from fog lamp.
Fig. 2 Fog Lamp Components
1 – FOG LAMP
2 – CLIP
3 – BULB
4 – ACCESS COVER
5 – BULB SOCKET
(1) Position bulb element in fog lamp.
XJ
page
- Quick Links:
- Table of Contents
- Engine
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
