Hydraulic Control Unit/Controller Antiblock Brakes Assembly; Antilock Brakes Specifications - Jeep 200 Cherokee Service Manual

5 - 40 BRAKES
DISASSEMBLY AND ASSEMBLY (Continued)
ASSEMBLY
(1) Install the CAB onto the HCU.
(2) Install the CAB mounting screws and tighten
to 1.8 N·m (16 in. lbs.).
(3) Install pump motor connector to the CAB.
SPECIFICATIONS
T0RQUE CHART
DESCRIPTION
G-Sensor
Sensor Bolt . . . . . . . . . . . . . . 3 N·m (27.5 in. lbs.)
Bracket Bolt . . . . . . . . . . . . . 2.7 N·m (24 in. lbs.)
Hydraulic Control Unit/Controller Antilock
Brakes
Mounting Nuts . . . . . . . . . 11.5 N·m (102 in. lbs.)
Brake Lines . . . . . . . . . . . . . 19 N·m (170 in. lbs.)
Controller Antilock Brakes
Mounting Screws . . . . . . . . . 1.8 N·m (16 in. lbs.)
Wheel Speed Sensors
Front Mounting Bolt . . . . . . 4.7 N·m (42 in. lbs.)
Rear Mounting Bolt . . . . . . . 13 N·m (115 in. lbs.)
XJ
TORQUE