Hardware Features; Microprocessor; Memory; Internal Drives - IBM 6643 User Manual

Hardware features

The following information covers a variety of models. For a listing of features
for your specific model, refer to the System Summary screen in the
Configuration/Setup Utility. For more information, see "Chapter 4. Using the
Configuration/Setup Utility program" on page 31.

Microprocessor

® ™ ®
v Intel
Celeron or Pentium III microprocessor
v Internal L2 cache memory (varies by model)
v 66 MHz or 133 MHz front side bus (FSB) (varies by model)

Memory

v Two dual inline memory module (DIMM) sockets
v 133 MHz synchronous dynamic random access memory (SDRAM)
v 64 and 128 MB non-parity, non-ECC DIMMs (standard)
v 256 MB non-parity, non-ECC DIMMs (optional)
v 512 MB maximum SDRAM supported
v Flash memory for system programs

Internal drives

v One EIDE hard disk drive
v One 3.5-inch diskette drive
v One CD-ROM or DVD-ROM drive

Graphics subsystem

Integrated high-performance graphics controller

Audio subsystem

v Integrated, 16-bit Sound Blaster Pro compatible audio controller with three
audio connectors (line/headphone out, line in, and microphone)
v A pair of built in stereo speakers to support multimedia applications

Communications

v Ethernet enabled
v Peripheral Component Interconnect (PCI) modem (some models only)

System management features

®
v Wake on LAN
v Wake on Ring
v Wake on Alarm
™
v Alert on LAN
2
User Guide