Table of Contents
Advertisement
Ping
Select Ping from the Network Parameters menu to test a connection to a remote
system unit. After selecting the ping option, you must first choose an adapter to
communicate with the remote system.
Adapter Parameters
After determining which adapter to use to ping the remote system, you must provide the
addresses needed to communicate with the remote system. Select the appropriate
device from the Ping menu to display a screen similar to the following:
PING IP Address
1. Client IP Address
2. Server IP Address
3. Gateway IP Address
4. Subnet Mask
===>
302
Service Guide
Device
1. Gigabit Ethernet
4: P1-I4/E1
2. token-ring
5: P1-I5/T1
3. ethernet
Integrated:P1/E1
4. ethernet
2: P1-I2/E1
5. token-ring
3: P1-I3/T1
(PRESS ENTER AFTER MAKING A SELECTION) ===>
[9.3.146.162]
[9.3.146.171]
[0.0.0.0]
[0.0.0.0]
.---------.
|E=Execute|
`---------'
Slot
Hardware Address
0004ac7c0135
0020357a9105
0060949d7ac5
0004ac5e692b
0004ac634e38
.------.
|X=Exit|
`------'
.------.
|X=Exit|
`------'
Advertisement
Table of Contents
