Specifications; Dimensions - IBM F80 Service Manual

FRU Name
DASD 6-Pack 2, Drive 3
DASD 6-Pack 2, Drive 4
DASD 6-Pack 2, Drive 5
DASD 6-Pack 2, Drive 6
2-Pack DASD Drive 1
2-Pack DASD Drive 2
Tape Drive
CD-ROM Drive
Notes:
1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation,
where the '/' identifies an integrated device (in this case the empty slot). A PCI
device plugged into the slot uses the P1-Ix notation, where the '–' identifies a
plugged device.
2. 11 is for the integrated SCSI device. -4,0 and -2,0 are hardcoded on the DASD
2-pack; -0,0 is the tape drive; -1,0 is the CD-ROM.
3. xx-xx is dependent on which SCSI controller is driving the 6-pack.
4. Use the link verification utility in the SSA service aids under AIX diagnostics to
identify individual SSA drives.

Specifications

This section contains specifications for the system.
The mechanical packaging, cooling, power supply, and environmental requirements for
the system are as follows:

Dimensions

In horizontal orientation, the dimensions are:
v Height - 610 mm (24.0 inches)
v Width - 483 mm (19.0 inches)
30
Service Guide
Slot Location AIX
Name Code Location
Code
D9 B2.3 SCSI:
xx-xx-00-
10,0 SSA:
See Note 4.
D10 B2.4 SCSI:
xx-xx-00-
11,0 SSA:
See Note 4.
D11 B2.5 SCSI:
xx-xx-00-
12,0 SSA:
See Note 4.
D12 B2.6 SCSI:
xx-xx-00-
13,0 SSA:
See Note 4.
D13 P1-Z1-A4 11-08-00-4,0 See Note 2.
D14 P1-Z1-A2 11-08-00-2,0 See Note 2.
D17 P1-Z1-A0 11-08-00-0,0 See Note 2.
D16 P1-Z1-A1 11-08-00-1,0 See Note 2.
Physical Logical
Connection Connection