IBM F80 Service Manual page 208

Table 7. Service Processor Error Codes (continued)
Error Code
4508 25CB
4508 25EA
4508 25EB
4508 25F2
4508 263D
4508 281F
4508 282E
4508 283F
4508 288D
4508 2A00
4508 300A
4508 300B
4508 300C
190
Service Guide
Description
1W processor card fault
4W processor card fault
2W processor card fault
6W processor card fault
Memory system and other bus
processor runtime diagnostics
detected memory filler fault
Memory system and other bus
processor runtime diagnostics
detected SSA backplane fault
Memory system and other bus
processor runtime diagnostics
detected system board fault
Memory system and other bus
processor runtime diagnostics
detected SCSI backplane fault
Memory system and other bus
processor runtime diagnostics
detected memory riser fault
Memory system and other bus
processor runtime diagnostics
detected 6W 4M 500 MHz processor
fault
Memory system and other bus
processor runtime diagnostics
detected 32MB DIMM fault
Memory system and other bus
processor runtime diagnostics
detected 128MB DIMM fault
Memory system and other bus
processor runtime diagnostics
detected 256MB DIMM fault
Action/ Possible Failing FRU
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Memory filler card, Location: P1-M1
or P1-M2
SSA 6-pack, Location: B1 or B2
Replace the system board. Location:
P1 (See note 3 on page 41.)
SCSI 6-pack, Location: B1 or B2
1. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See "Memory
Configuration/Deconfiguration
Menu" on page 268 for more
information.
2. Memory riser card, Location:
P1-M1 or P1-M2
Processor card, Location: P1-C1
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn