Ping - IBM Eserver pSeries 670 User Manual

Ping

Select Ping from the Network Parameters menu to test a connection to a remote
system unit. After selecting the Ping option, you must first choose an adapter to
communicate with the remote system.
Adapter Parameters
1. Gigabit Ethernet
2. token-ring
3. ethernet
4. ethernet
5. token-ring
(PRESS ENTER AFTER MAKING A SELECTION) ===>
After determining which adapter to use to ping the remote system, you must provide the
addresses needed to communicate with the remote system. Select the appropriate
device from the Ping menu to display a screen similar to the following:
PING IP Address
1. Client IP Address
2. Server IP Address
3. Gateway IP Address
4. Subnet Mask
.---------.
|E=Execute|
`---------'
===>
Device Slot
4: U1.9-P1-I4/E1
5: U1.9-P1-I5/T1
8: U1.9-P1-I8/E1
2: U1.9-P2-I2/E1
3: U1.5-P1-I3/T1
[9.3.146.162]
[9.3.146.171]
[0.0.0.0]
[0.0.0.0]
Hardware Address
0004ac7c0135
0020357a9105
0060949d7ac5
0004ac5e692b
0004ac634e38
.------.
|X=Exit|
`------'
.------.
|X=Exit|
`------'
Chapter 4. Using System Management Services
65