H3C MSR 20-1X Installation Manual page 57

Loading...................................................................
..........................................................................
..........Done!
22165484 bytes downloaded!
Updating File flash:/update.bin
Enter 0 to return to the main BootWare menu. Enter 1 to boot the system from the Flash memory.
Step4
Set the upgraded application program to the main application file, namely, the default boot file of the
Step5
system. Enter 4 when the above information appears.
==============================<File CONTROL>==============================
|Note:the operating device is flash
|<1> Display All File(s)
|<2> Set Application File type
|<3> Set Configuration File type
|<4> Delete File
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-4):2
Enter the file control submenu and enter 2 to set the application file type.
'M' = MAIN
==========================================================================
|NO. Size(B)
|1 22165484
|2 22165484
|0 Exit
==========================================================================
Enter file No:1
Enter the number of the file name to be modified.
Modify the file attribute:
==========================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
==========================================================================
Enter your choice(0-4):1
Enter 1 to set the selected application program to the main application file, namely, the default boot file
of the system.
Enter 0 to return to the main BootWare menu. Enter 1 to boot the system from the Flash memory.
Step6
'B' = BACKUP
Time
Dec/20/2007 09:18:10 S
Dec/20/2007 09:42:28 M
'S' = SECURE 'N/A' = NOT ASSIGNED
Type Name
flash:/update.bin
flash:/main.bin
50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|