Upgrading An Application Program Through An Ethernet Interface - H3C MSR 20-1X Installation Manual

|<4> Delete File
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-4):
The submenu is described as follows:
Table 22 File control submenu
Item
<1> Display All File
<2> Set Application File type
<3> Set Configuration File type
<4> Delete File
<5> Exit To Main Menu
BootWare operation submenu
Enter 7 in the main BootWare menu to enter the BootWare operation submenu:
========================<BootWare Operation Menu>=========================
|Note:the operating device is flash
|<1> Backup Full BootWare
|<2> Restore Full BootWare
|<3> Update BootWare By Serial
|<4> Update BootWare By Ethernet
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-4):
The submenu is described as follows:
Table 23 BootWare operation submenu
Item
<1> Backup Full BootWare
<2> Restore Full BootWare
<3> Update BootWare By Serial
<4> Update BootWare By Ethernet
<0> Exit To Main Menu
Upgrading an Application Program Through an
Ethernet Interface
Enter 3 in the BootWare menu to enter the Ethernet interface submenu. For details about the submenu,
refer to BootWare Submenus on page 45.
47
Description
Display all files.
Set an application file type.
Set a configuration file type.
Delete a file.
Return to the main BootWare menu.
Description
Back up the full BootWare.
Restore the full BootWare.
Upgrade BootWare through a serial interface
Upgrade BootWare through an Ethernet interface
Return to the Main BootWare menu
|
|
|
|
|
|
|
|