H3C MSR 20-1X Installation Manual page 46

Sending file to remote tftp server. Please wait... \
TFTP:
File uploaded successfully.
Use the following command to download the startup.cfg file from the server to the router:
<SYSTEM>tftp 192.168.1.1 get startup.cfg startup.cfg
The file startup.cfg exists. Overwrite it?[Y/N]:y
Verifying server file...
Deleting the old file, please wait...
File will be transferred in binary mode
Downloading file from remote tftp server, please wait...\
TFTP:
File downloaded successfully.
If a startup.cfg file already exists in the router, the system prompts you whether to overwrite it. You can
type Y or y to overwrite it.
Upgrading the application programs
After setting up the environment, perform the following operations on the device (the application name
is msr.bin for example):
Use the save command to save the current configuration:
<SYSTEM>save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Use the dir command to view the application files and the available space of the CF card (ensure that the
CF card has enough space to store a new application):
<SYSTEM>dir
Directory of flash:/
0 -rw-
1 -rw-
2 -rw-
3 -rw-
31369 KB total (15921 KB free)
<SYSTEM>
Download the application msr.bin to the CF card of the device through TFTP:
<SYSTEM>tftp 192.168.1.2 get msr.bin
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...\
TFTP: 15054340 bytes received in 34 second(s)
File downloaded successfully.
Use the boot-loader command to set the startup file for the next startup to msr.bin:
<SYSTEM>boot-loader file flash:/msr.bin main
This command will set the boot file. Continue? [Y/N]:y
1045 bytes sent in 0 second(s).
1045 bytes received in 0 second(s)
15801497 Jan 01 2007 00:14:35
9187 Jan 01 2007 00:12:23
139 Jan 01 2007 00:05:39
800 Jan 01 2007 00:12:28
main.bin
config.cwmp
system.xml
startup.cfg
39