H3C MSR 20-1X Installation Manual page 51

**************************************************************************
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu....
NOTE:
The extended BootWare menu is referred to as main BootWare menu hereinafter in this manual unless
•
otherwise specified.
The sample output above may vary on your device.
•
If you press Ctrl+B when the system displays "Press Ctrl+B to enter extended boot menu...", the system
prompts for the BootWare password:
Please input BootWare password:
After you enter the correct password, the system enters the main BootWare menu. (The initial password
is null. You have three chances to provide the correct BootWare password. If you have tried three times
but failed, you need to reboot the system).
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTEND-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
==========================================================================
Enter your choice(0-9)
This menu is described as follows:
: Jul 29 2008
: MPC8323E
: 16KB
: 333MHz
: DDR SDRAM
: 256MB
: 132MHz
: 1024KB
: 1.0
: 3.0
44
|
|
|
|
|
|
|
|
|
|