Maintaining Application Program And Configuration Through Command Lines - H3C MSR 20-1X Installation Manual

NOTE:
The BootWare program is upgraded together with the Blinux application program. You do not need to
•
upgrade the BootWare separately. When upgrading the Blinux program, the system checks whether the
running BootWare version is consistent with that in the updating host application program. If
inconsistent, the system asks whether to upgrade the BootWare. If you make no choice within one
second, the system upgrades the BootWare automatically.
When the flexible interface platform (FIP) starts, it automatically checks the running BootWare version.
•
If the current version is inconsistent with the version used on the FIP, the system upgrades the BootWare
automatically.
Check the current version of BootWare and application program before upgrade. For the version
•
configuration information, see the corresponding
Figure 32 Upgrade flowchart for BootWare and Comware under the Comware V5 environment
Comware version
Upgrade Comware ?
Choose correct Comware
Choose upgrade mode
Xmodem
upgrade
Maintaining Application Program and
Configuration Through Command Lines
After the router is booted, you can upgrade and back up an application program, and back up and
restore configurations through command lines.
Start
N
Y
Via network
interface
TFTP FTP
upgrade upgrade
Upgrade
End
Release Notes
.
37