Table 19 Main BootWare menu
Item
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Modify BootWare Password
<6> Skip Current System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<9> Storage Device Operation
<0> Reboot
BootWare Submenus
Serial interface submenu
Through this submenu, you can upgrade an application program, change the baud rate of a serial
interface, and perform other operations.
Enter 2 in the main BootWare menu to enter the serial interface submenu:
==========================<Enter Serial SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Serial Interface Parameter
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-5):
The submenu is described as follows:
Description
Bootstrap.
Enter the serial interface submenu. For details about the
submenu, refer to
Serial interface submenu
Enter the Ethernet interface submenu. For details about the
submenu, refer to
Ethernet interface submenu
File control submenu. For details about the submenu, refer to
File control submenu
on page 46.
Modify the BootWare password.
Boot the system with the default setting, instead of the current
system configuration file. This function takes effect only for this
startup. It is usually used after you lose your password.
BootWare operation submenu. For details about the
submenu, refer to
BootWare operation submenu
Remove the super password.
You need to use the super password when switching the user
level. After you select the option, the super password will be
cleared only at the first reboot. At the next reboot, the super
password will restore.
The storage device operation menu, where you can select a
storage device.
Reboot the router.
45
on page 45.
on page 46.
on page 47.
|
|
|
|
|
|
|
Need help?
Do you have a question about the MSR 20-1X and is the answer not in the manual?