Black Box PC124C Installation Manual page 96

Example: &%Z31,1 causes text that exceeds the maximum print position to be
truncated (not printed)
COMMAND 32: PAPER SIZE
Specifies the paper size used for printing.
VALUE DESCRIPTION
*0 Selects 8 1/2" x 11" letter paper
1 Selects A4 (210mm x 297mm, 8.27" x 11.69") paper
2 Selects 8 1/2" x 14" legal paper
3 Selects 11 x 17 paper
4 Selects A3 paper (279.4 x 431.8 mm)
5 No paper size sent. Selected using the printer's front panel
Example: &%Z32,1 selects A4 paper
COMMAND 34: INTERVENTION REQUIRED (IR) TIMEOUT
Sets the time interval before an intervention required signal is sent to the host after
a printer error occurs. Note that the interface's setup switch #4 must be set to "0"
(enabled).
VALUE DESCRIPTION
000 Never send an IR
001 to 255 IR is sent (value *5) seconds after printer error occurs
*120 Default, send IR after ten minutes.
Example: &%Z34,036 sets IR time interval to 3 minutes (=6 *5/60)
COMMAND 36: SUPPRESS IBM CONTROL CODES (Host Commands)
This function is used to select suppression of all or some IBM control codes sent
from the host system.
*Factory-default setting.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
95