LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
VALUE
*0
1
In most cases, the host application generates a termination FF and there
is no need to change this command from the default.
Example: &%Z27,1 sends a FF after time delay selected by command 51 (default =
5 sec.) when unprinted data remains in the print buffer.
COMMAND 30: OVERRIDE OF FORMATTING COMMANDS
Enables the printer's front-panel selections to control how a job is printed.
VALUE
*0
1
When active, this command overrides the interface's default selections
for CPI, LPI, font, orientation, bin selection, paper size, COR and line
compression.
A reset command is sent to the printer before a coax print job in order to
restore the printer's front panel default selections.
This command has no effect on the special features Command Pass-
Thru, user strings, initialization strings and coax host RPQs.
Example: &%Z30,1 sets override of formatting commands.
COMMAND 31: TRUNCATE/WRAP SELECT
Selects whether the interface truncates or wraps the text if the maximum print
position is exceeded.
VALUE DESCRIPTION
*0
Allow text to print on next line when maximum print position is exceeded
1
Truncate text beyond the maximum print position
94
*Factory-default setting.
DESCRIPTION
No extra FF is sent
Send FF after timeout value
DESCRIPTION
Normal operation (disabled)
Formatting commands are not sent to the printer (enabled)
NOTE
NOTES