Black Box PC124C Installation Manual page 89

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
This command defines the default paper source for the Page
Presentation Media (PPM) command in SCS mode. If the PPM command
is received from the host, the interface always sends the paper source
to the printer unless value 0 is selected.
If the printer does not have a secondary paper bin or an envelope
feeder, it ignores the command, but it will be used for Commands 62-64
logic.
The printer ignores the command if it does not have a secondary paper
bin or an envelope feeder.
A manual sheet feed command in the SCS PPM causes the printer to
wait for the operator to insert paper in the manual feed tray. This
command takes effect immediately if placed on the first position of the
page (line 1, position 1); otherwise, it takes effect on the next page.
Example: &%Z11,5 selects manual sheet feed as the default source of paper.
COMMAND 12: FORM FEED BEFORE LOCAL SCREEN PRINT
Specifies whether a form feed is performed before doing local screen print.
VALUE
*0
1
This command only affects the local screen copy function, not the host-
initiated local copy printing, and functions only in LU3 (non-SCS)
operations.
Example: &%Z12,1 performs a FF before local screen dump
COMMAND 13: FORM FEED AFTER LOCAL SCREEN COPY
Specifies whether a form feed is performed after a local screen hard copy.
*Factory-default setting.
88
NOTES
DESCRIPTION
No form feed before local screen dump
Form feed before local screen dump
NOTE