Black Box PC124C Installation Manual page 100

VALUE
*0
1
This command enables the user to print only the section of the
document that is in question in buffer hex dump format. Hex printing
starts with the buffer after the start command.
Examples: &%Z42,1 starts buffer hex dump printing
COMMAND 43: START/STOP ASCII HEX DUMP
After receiving a start command, the interface, starting with the next buffer
received, translates all host data into ASCII (from EBCDIC) and then causes the
ASCII data to print in hexadecimal form. The ASCII hex dump is performed until
the printer is powered off.
VALUE
*0
1
Example: &%Z43,1 starts ASCII hex dump printing.
COMMAND 45: SCS TRN TRANSLATE
Specifies how transparent data sent using SCS code 35 is handled.
VALUE
0
*1
Value 1 causes valid graphic characters to be printed normally (i.e.,
converted from EBCDIC to ASCII), while control codes and invalid
graphics are printed as hyphens, and normal page formatting is
maintained.
Value 0 causes the 8-bit binary codes to be sent directly to the printer
just as they are received from the host.
*Factory-default setting.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
DESCRIPTION
No action taken
Start EBCDIC hex dump
DESCRIPTION
No action taken
Start ASCII Hex Dump
DESCRIPTION
Binary Transparent
Emulate IBM 3287 Printer
NOTE
NOTES
99