Black Box PC124C Installation Manual page 45

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
VALUE
*0
1
This command enables the user to print only the section of the
document that is in question in buffer hex dump format.
Example: &%Z42,1 starts buffer hex dump printing.
COMMAND 43: START/STOP ASCII HEX DUMP
After receiving a start command, the interface, starting with the next buffer
received, translates all host data into ASCII (from EBCDIC) and then causes the
ASCII data to print in hexadecimal form. The ASCII hex dump is performed until
the printer is powered off.
VALUE
*0
1
Example: &%Z43,1 starts ASCII hex dump printing.
COMMAND 98: RESTORE DEFAULTS OR PRINT CONFIGURATION
Restores the factory default configuration selections, prints out a copy of the active
configuration selections, or restores the permanent memory selections to the
active setup status.
44
*Factory-default setting.
DESCRIPTION
No action taken
Start EBCDIC hex dump
NOTE
DESCRIPTION
No action taken
Start ASCII Hex Dump