Black Box PC124C Installation Manual page 44

COMMAND 32: 11" x 17"/A3 PRINTING
Forces the printer to print on 11 x 17 inch or A3 size paper, even when the host
sends requests for smaller paper sizes (letter, legal, A4, Executive). This only
applies to printers capable of printing on 11 x 17 inch or A3 size paper.
VALUE
*0
1
With the 11 x 17/A3 selection ON, the interface's APO feature (if turned
ON) will automatically rotate all documents/reports with dimensions of
11 x 17 inches or smaller.
document/report has to be larger than 11 x 17 inches.
Example: &%Z32,1 forces printing on large paper. The interface will request the
printer to load A3 size paper when the host requests A4 or A3, and 11 x 17 inch
paper in all other cases.
COMMAND 33: DUPLEX PRINTING
Sets the interface to duplexing mode. This applies only when a printer with
duplexing capability is attached.
VALUE
*0
1
2
Example: &%Z33,2 instructs the interface to duplex all host print jobs along the
short edge of the paper.
COMMAND 42: START AND STOP EBCDIX HEX DUMP
After receiving a start command the interface, starting with the next buffer
received, sends all host data directly to the printer as hexadecimal printing until
the printer is powered off.
*Factory-default setting.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
DESCRIPTION
11 x 17/A3 selection is OFF
11 x 17/A3 selection is ON
DESCRIPTION
No
Yes
Tumble
NOTE
To achieve COR in this case, the
43