Paper Input Bin Selections - Black Box PC124C Installation Manual

when the host sends requests for smaller paper sizes (letter, legal, A4, Executive).
If this is desired, the interface's 11 x 17/A3 selection should be turned ON
through Host Download command 32.
With this selection turned ON, the interface will request the printer to load A3
size paper when the host requests A4 or A3, and 11 x 17 inch paper in all other
cases. In addition, the interface's APO feature (if turned ON) will automatically
rotate all documents/reports with dimensions of 11 x 17 inches or smaller. To
achieve COR in this case, the document/report has to be larger than 11 x 17
inches.

6.8 Paper Input Bin Selections

The IBM host give users the option to select different paper sources when printing.
This can be done through the print file or through the Page Layout/Paper
Options menu of OfficeVision/400 (see figures below). On the host, these paper
sources are called Source Drawer (printer file) or Paper Drawer (Office
Vision/400). On the printer, the actual paper sources are usually called trays. The
interfaces will map the host's drawer values 1 through 5 to actual paper trays on
the attached printer.
Users can easily change the default tray mapping through Host download
commands 13, 14, 15, 30, 31. These commands can also be accessed through the
printer's operator panel.
Command 13 will map the IBM drawer #1 to the paper tray of your choice.
Paper trays are identified through a number. These tray numbers are printer-
specific and are listed as PCL printer commands in your printer's user's guide.
For example, to change the mapping for the IBM paper drawer #1 from the
default Tray 2 (the 250-sheet feeder just below the printer) to Tray 4 (the optional
third 250-sheet feeder) of your HP LaserJet 4000, do the following:
1. Press Menu on the printer's operator panel to scroll to the TWINAX CARD.
2. Press Item + repeatedly until "13=IBM DRAWER 1" is displayed.
3. Press Value + repeatedly until "13=8 TRAY CMD" is displayed.
4. Press Select to select this setting. The display will show "13=8 TRAY CMD*".
5. Press GO to return the printer to operating mode.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
51