Black Box PC124C Installation Manual page 101

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
SCS code 36 functions the same as code 35.
Available in SCS (LU1) mode only.
Example: &%Z45,0: All SCS Code 35 data is sent to the printer as binary codes
without translation.
COMMAND 51: HOST-PORT TIMEOUT
Selects the time interval that the interface waits for receipt of additional data from
the coax host before automatically switching to check for data from the alternate
(PC/LAN) host.
VALUE
04
to
60
*08
The alternate (PC/LAN) host is responsible for sending any needed
format commands required by the printer prior to sending printable
data.
If your printer supports Intelligent Emulation Switching (IES), make sure
the printer's IES timeout period is less than the command 50 timeout
setting.
COMMAND 55: CUSTOM USER STRINGS
Allows the user to define up to six custom user strings, of up to 25 bytes each,
which are stored in the memory of the interface and sent to the printer whenever
the character delimiter, letter U, and number of the string appears in the text of
the document (for example, &%U3).
VALUE
0-5(max. 25 bytes of ASCII hex code)
0-5()
100 *Factory-default setting.
DESCRIPTION
Time interval in number of seconds
Factory default is 8 seconds
NOTES
DESCRIPTION
Defines the custom user string
Deletes custom user string